Chain for Forklift

Forklift Chain - The life of the forklift lift chains could actually be lengthened with proper maintenance and care. Lubricating correctly is a great method so as to extend the capability of this particular lift truck part. It is important to apply oil periodically with a brush or whatever lube application device. The frequency and volume of oil application should be adequate to be able to avoid whichever rust discoloration of oil within the joints. This reddish brown discoloration usually signals that the lift chains have not been correctly lubricated. If this situation has happened, it is really essential to lubricate the lift chains right away.

Through lift chain operation it is normal for some metal to metal contact to happen that could result in some parts to wear out in the long run. When there is 3% elongation on the lift chain, it is considered by industry standards to have worn out the chain. So as to stop the scary possibility of a disastrous lift chain failure from taking place, the manufacturer highly recommends that the lift chain be replaced before it reaches 3% elongation. The lift chain gets longer due to progressive joint wear which elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

One more factor to ensuring proper lift chain maintenance is to check the clevis pins on the lift chain for signs of wear and tear. The lift chains have been put together so that the tapered faces of the clevis pin are lined up. Normally, rotation of the clevis pins is commonly caused by shock loading. Shock loading occurs when the chain is loose and then suddenly a load is applied. This causes the chain to experience a shock as it 'snaps' under the load tension. Without the correct lubrication, in this case, the pins can rotate in the chain's link. If this particular scenario takes place, the lift chains must be replaced instantly. It is imperative to always replace the lift chains in pairs to be able to ensure even wear.


Click to Download the pdf

Forklift Parts

JLG Forklift Part

JLG Forklift Parts - In the late 1960's John L. Grove, with his wife Cora embarked on on a cross country journey in their RV. Newly retired, after spending several years working with his brother to assemble their crane company into an industry leader, John had no idea that important trip would allow JLG Industries, Inc to emerge. The world...

More

---

Cascade Attachment

Cascade Attachments - Established in Portland, Oregon in 1943, the Cascade Manufacturing Company began as a small machine shop employing just four individuals. Overall sales for that year amounted to about $60,000. The very first recorded sales revenues involved the machining and assembly of stainless steel pipe fittings, valves and various parts. During five years of operation, the business had...

More

---

Forklift Safety Equipment

Forklift Safety Equipment - There are several operations and industries, for instance warehousing, agricultural and manufacturing which make use of powered industrial trucks together with lift trucks or forklift trucks frequently in the workplace. Lift trucks are used to lower or raise objects or transport objects that are stored on pallets or in containers to other areas within the workplace....

More

---

Manitou Forklift Part

Manitou Forklift Parts - Manitou is a well established business who specializes in the manufacturing of forklifts, skid steer loaders, telehandlers and a range of other kinds of heavy construction equipment. In regard to lift trucks, there are numerous models on the market being made by well-known companies so as to suit all of the requirements of the mining, industrial...

More

---

Rockwell Parts

Rockwell Parts - The company of AxleTech International is a big supplier of specialty vehicle drive-train systems and components together with off highway vehicles. They take great pride in being a preferred supplier to their customer base. AxleTech strives to meet and exceed their clients' expectations for technology, delivery, quality and service. They believe in working within an atmosphere that...

More

---

Fork Positioner for Forklifts

Forklift Fork Positioner - The fork positioner is a hydraulic apparatus that could allow the the one driving to work the lift truck without leaving the seat. They are made out of high quality materials and are meant to endure the most challenging procedures and work environments. Side shifting models have the added ability to laterally position the entire load...

More

---

Parts for Sweepers and Scrubbers

Sweeper and Scrubber Parts - The first vacuum cleaners were invented during the 1860's. Fortunately, floor cleaning equipment and scrubbers have significantly evolved since that time. Daniel Hess created the very first carpet sweeper in Iowa, USA. His version had a rotating brush along with an intricate arrangement of bellows located on top to generate suction. We are lucky nowadays...

More

---

Attachments for Portable Manlift

Portable Manlift Attachments - The best way to use industrial equipment for a short duration of time is to lease the item from a machine leasing business. These leasing companies are helpful to homeowners and to contracting companies because they provide a service that allows clients to save a considerable amount of money on operation expenses. Different industrial machines are...

More

---